- Laboratory Heating Equipments[6]
- Other Lab Supplies[5]
- Contactors[2]
- Other Electrical Equipment[2]
- Electrical Contacts and Contact Materials[6]
- Other Electronic Components[2]
- Electric Heater Parts[1]
- Other Home Appliance Parts[1]
- Industrial Furnace[2]
- Other Machinery[1]
- Refrigeration & Heat Exchange Parts[6]
- General Mechanical Components Stock[1]
- Ceramics[1]
- Other Non-Metallic Mineral Deposit[2]
- Other Metals & Metal Products[6]
- Other Non-Metallic Minerals & Products[6]
- Refractory[2]
- Titanium Sheets[5]
- Tungsten Bars[6]
- Tungsten Crucibles[6]
- Tungsten Sheets[6]
- Tungsten Wire[2]
- Contact Person : Ms. Huo Sunny
- Company Name : Zhengzhou Chida Tungsten & Molybdenum Products Co., Ltd.
- Tel : 86-371-67823000
- Fax : 86-371-67823288
- Address : Henan,Zhengzhou,No.2 Hangzhou Road
- Country/Region : China
- Zip : 450042
super mosi2 heating elements U type
Related Product Searches:super mosi2 heating elements U type,High Quality,mosi2 heating element, electric heating element,U type
Molybdenum disilicide (MoSi2) heating element is a resistance generate-heating component madefrom MoSi2 or the basic material. It has unique effect for resisting oxidization in the hightemperature. It is used to the highest temperature up to 1800 degreesduring oxidizing atmosphere.
* Dia. 3,4,6,7,9,10,12,18,24
* Temp: 1000-1800 celsius degrees
* Used in the industries of metallurgy, magnetic materials, glass, ceramic refractory, crystal electronic device,industrial furnace manufacture, lab furnace,Laboratory furnace,industry furnace,glass furnace,ceramic furnace etc..
MoSi2 Heating Element's installation: The brittleness of MoSi2 heating element is relative more under the usual temperature, it also has plasticity under the high temperature.So you had better hang and erect vertically the "U"shape element. If you need to erect it horizontally, please choose a support of hightemperature insulating materials. The conepart of the element must extend inside the furnace. At first the fixture of MoSi2 power connector cant be screwed too tightly. When temperature of the element is going up, please twist it tightly again, so the element is not easily broken.
Our suggestion: please choose the specialize power connector provided by our company.The furnace top must be a good function of heatpreservation. In general, the temperature of furnace top cant be over 300C. The voltage should be low 0.1 between the power connector and the element. In order to avoid radiating heat to pass the connector, the distance is not less than 50mm between the low end of connector and the upside of the ceramic brick. The Dia.6 element cant be used of 170A for a long time. The Dia.9 element cant be used of 300A for a long time.
When you place an order of the U Shape Mosi2 Heating Element, please give following information:
Material Grade: M1700/M1800
Φc:Heating Diameter
Φd: Terminal Diameter
Lu:Terminal Length
Le: Hot Zone Length
a:Shank Spacing
If you have the special requirement for the resistance, please tell us!
super mosi2 heating elements U type
